Menu
Last Updated On 10th April 23
How To Do Microdermabrasion At Home - A Beginner's Guide
Table of Contents
When it comes to skin care treatments, most people think of consulting with a dermatologist, but we all know that this can be extremely expensive. Don’t worry, we can assist you because we would like to tell you that you can perform your microdermabrasion at home!
You can acquire skin-smoothing advantages directly from your bathroom with some research and precise instruction from your dermatologist. Not only do you have complete control over your budget, but you can also treat yourself in your own space while maintaining your results with best at home microdermabrasion without breaking the bank.
In this article, we will inform you how to do microdermabrasion at home with your choice of microdermabrasion at home kit!
What is Microdermabrasion?
Microdermabrasion, according to the American Academy of Dermatology Association, involves gently exfoliating the top layer of your skin with a moderately abrasive tool. It exfoliates the skin, minimises signs of ageing, removes dark spots and scars, and evens up the tone and texture. This procedure is gentle on your skin because it massages it with fine crystals or diamond-studded tips and uses hoover suction to remove dead skin cells. Recovery time is substantially faster as compared to other invasive procedures such as dermabrasion, chemical peeling, and laser resurfacing.
The procedure typically takes around 30 minutes and can be combined with other treatments. It normally doesn’t hurt, although it may take several sessions to get the desirable outcomes.
Microdermabrasion has two stages. To start, a tool gently exfoliates your skin’s top layer to remove dead skin cells, while a suction sucks the removed skin cells and debris off.
Should I Do Microdermabrasion At Home?
Microdermabrasion at-home kits are basically just facial scrubs that exfoliate dead skin with aluminium oxide crystals. These scrubs are effective for light exfoliation but are similar to facial scrubs that use beads or grains to remove dead skin. The number of active substances in at-home products is substantially lower than that of professional products.
As a result, most at-home treatments do not generate the same dramatic or long-lasting outcomes as professional treatments. Furthermore, when done professionally, the equipment utilised requires training and must be used correctly in order to avoid injuring the skin.
Microdermabrasion has been demonstrated to be a safe and efficient approach to improve the way your skin looks. Nonetheless, you should consult your dermatologist before undergoing microdermabrasion since some medications and skin diseases can enhance skin sensitivity. Although at-home alternatives will not deliver the same degree of skin smoothing as a professional treatment, don’t let that stop you from doing it because they can still provide mild exfoliating advantages safely.
How To Do Microdermabrasion At Home?
Of course, before we begin, you’ll need to buy a microdermabrasion at-home kit. Although the exfoliating scrubs you get from the pharmacy can help remove dead skin, nothing beats a microdermabrasion device. If you do not know how to use a microdermabrasion machine, don’t be scared because each kit will come with a full step-by-step instructions for you to follow!
We will walk you through a step-by-step microdermabrasion at-home treatment. If you are wondering what to put on face before microdermabrasion at home or what to put on face after microdermabrasion at home, we got you covered because everything will be explained in detail!
Now, get yourself ready for the best at home microdermabrasion treatment ever!
Step 1 – Cleanse Your Face
For the best microdermabrasion outcomes, your skin should be clean and free of makeup, dirt, oil, and debris. You can cleanse your face with a gentle cleanser or micellar water, and once you’ve removed all the leftover dirt, cleanser or micellar water, pat your skin dry.
Step 2 – Prep Your Tool
Before beginning the procedure, you should prepare your at-home microdermabrasion kit by selecting the right tip and peeling level of intensity. For those with sensitive skin, we advise going with the lowest setting and gradually increasing to the higher level when your skin has adjusted after a few treatments.
Step 3 – Start Microdermabrasion Treatment
When utilising your at-home microdermabrasion device, start on the lowest setting to evaluate how your skin reacts because starting off too strongly can result in acne, bruises, or irritated skin. Hold the microdermabrasion tool like a pencil, flatten the tip on your skin, and drag it around your face smoothly. The hoover will not suction adequately if the tip is not sitting flat on your skin. You will feel a light pull of suction on your skin, but we promise you that it will be completely painless.
You want the microdermabrasion tool to be moving all the time, and working in small portions is advisable. Don’t hover in one place and don’t go over the same spot more than twice. Gently move the tool on your skin in an upward manner.
For instance, as for your cheeks and chin area, begin in the middle of your face and gradually go sideways to the outer parts of your face, repeating the technique until you have covered all of your cheeks and chin.
As for the lip area, use a smaller tip as it would be easier for you to move the tool around and make sure to be careful not to allow the diamond microdermabrasion tip to touch your lips!
Eyes are another sensitive area so you have to proceed with caution.
Moving on to the forehead area, you can begin in the middle of your forehead and work your way out to the sides of your face. Do not rush and do one side at a time!
For the nose area, it is simple as all you need to do is to bring the tool downwards from the bridge area and then outwards to the side of your nose.
You may detect dead skin flakes on the tool after completing the microdermabrasion at home treatment on your skin. To prepare your microdermabrasion tool for the following treatment, easily take the diamond tip, remove the filter, brush off any dead skin bits, and replace the filter.
Step 4 – Gently Rise or Cleanse Your Face
Following your treatment, gently wipe your face to eliminate any lingering dead skin particles. At this stage, you can splash your face with water or use micellar water, but do avoid using any harsh cleansers at all cause as your skin could be somewhat sensitive by the microdermabrasion process, you don’t want to aggravate it further.
Step 5 – Apply a Rich Moisturizer
After the at-home microdermabrasion treatment, your skin will appear slightly red and irritated. While this mild redness fades fast, use a relaxing serum and a rich moisturiser to soothe your freshly exfoliated skin. If you’re going out in the sun, we recommend wearing a moisturiser with SPF to keep your skin safe.
What Shouldn’t I Do When Performing Microdermabrasion At Home?
- Don’t over-exfoliate. Over-exfoliating a specific area of skin or using your microdermabrasion tool too frequently might result in irritation of skin, dryness and inflammation.
- Avoid using your microdermabrasion at-home kit forcefully. While utilising an at-home microdermabrasion kit, use with caution when putting pressure.
- Skip certain products. Change up your skincare routine in the days coming prior to microdermabrasion to prepare your skin for the at-home microdermabrasion facial treatment.
- Going out without SPF. Sunscreen is a crucial component of any skincare routine, but it is extremely important following at-home microdermabrasion. Its antioxidant-rich composition nourishes, soothes, and protects the skin after treatment.
Intervals Between Treatment
It is critical to provide ample time between microdermabrasion treatments so that your skin can heal. Many dermatologists advise waiting two weeks between treatments, but you should follow the instructions on the product you’re using. It should not be used more frequently than suggested because it can bring harm to your skin. Each treatment’s frequency will also be determined by your skin type, skin concerns, and goals.
You now understand exactly how to perform microdermabrasion at home! You can finish an at-home microdermabrasion treatment in 10-15 minutes to achieve healthier skin naturally. Your skin will feel unbelievably smooth and silky after the treatment.
If you decide to try microdermabrasion, be mindful that the results are just temporary. But the best part is, you do not have to worry about splurging your savings for the monthly maintenance since with a microdermabrasion at-home kit, you can easily do it by yourself!
Camelia
My deep passion for beauty tech devices fuels me to write and share my thoughts to likeminded individuals.
Frequently Asked Question
Microdermabrasion is a cosmetic treatment that removes dead skin cells by using tiny crystals and a suction. It is suitable for application on the face, neck, chest, back, and hands. The goal is to make the skin finer and healthier looking by reducing fine lines, small scars, wrinkles, and hyperpigmentation.
Some of the best microdermabrasion machines can be as low as $90 or as high as $600. The price of the machine will determine the cost of your clinic’s microdermabrasion treatments.
More expensive machines will typically provide more options for attachments and additional applications. They will also most likely have stronger suction and, as a result, greater outcomes. This means that clinics with more expensive machines are more likely to charge more for treatments.
The cost of a microdermabrasion treatment differs substantially based on the dermatologist’s expertise and credentials, as well as other factors. The most expensive treatment isn’t usually the best, but low-cost procedures should be addressed with caution.
This treatment is suitable for all skin types and tones. This treatment, no matter the technique, does not carry the danger of pigmentation damage as other cosmetic treatments do for people with darker skin. This therapy is also suitable for people who have sensitive skin.
It can be seen how her fine wrinkles and pigmentations have been reduced with microdermabrasion treatments. The after results show how awake and alive she looks compared to the before. The effects of microdermabrasion are instantly visible. For a few weeks, your skin may be sun sensitive and should be protected with sunscreen. It is critical to keep your skin hydrated.
The treatment’s effects usually last about a month. The duration of the results varies from person to person as well as how you react to the treatment, however most patients plan regular sessions every 4 weeks. Most people’s reactions to the treatment are determined by how quickly their bodies turn over new cells, which takes about 2 to 3 weeks.
Regular monthly treatment meetings can yield the desired effects for many people. But, if you have a specific skin condition, such as those associated with age, you may require further treatments. You will be proposed to a course of different treatments spaced between two and four weeks apart for certain individuals who have mild skin issues to get the initial intended results. Following that, appointments are utilised to maintain results.
SUBSCRIBE
Stay up-to-date with the latest news, tips, and trends by subscribing to our blog. Join our community and never miss a post! Sign up now and receive great gifts as a thank you for joining us